FATIGUE FAILURE -DETAILED ANALYSIS AND STUDY

0
FATIGUE FAILURE: INTRODUCTION AND STUDY Fatigue : Defined as a condition where structures fail when subjected to a cyclic load. A common observation came out when...
FLUCTUATING STRESSES

FLUCTUATING LOAD DESIGN:INTRODUCTION

0
STUDY OF FLUCTUATING STRESSES :WHY IT IS IMPORTANT IN DESIGN??? Fluctuating stresses??? WHAT, HOW AND WHY???? Till now, IN THE PREVIOUS BLOGS, we learned about static...

REDUCTION OF STRESS CONCENTRATION:STUDY

0
STRESS CONCENTRATION STUDYStudy of stress concentration is similar to FLOW ANALOGYFLOW ANALOGYUsed for both study of velocity distribution(fluid flow) and stress distribution(stress material)REDUCTION OF...
SHAFT UNDER BENDING

FACTOR OF STRESS CONCENTRATION OR Kt:STUDY

0
Factor of stress concentration is necessary in order to enhance safe design of components . It also leads to an increase in efficiency of...

‘CROSS SECTION VARIATION'(STRESS CONC. STUDY)

0
STRESS CONCENTRATION- INTRODUCTION: Why Sudden cross section variation (Stress Concentration study) was necessary to study for component design???????????? Basic stress equations given below as: These stress equations...

ST.LOADING 4 -STIFFNESS & ECCENTRIC LOADING

0
ECCENTRIC LOADING,STIFFNESS AND DESIGN-IT'S SIGNIFICANCE ECCENTRIC LOADING CONDITIONS AND STIFFNESS PLAYS AN IMPORTANT ROLE IN DESIGN ANALYSIS AND STUDY. Stiffness defined as the ability of a...

STATIC LOADING DESIGN 3: STRESS IN SYSTEMS

0
STRESS have the same work in any force system; i.e to develop an Internal Resistance within the body. FOR Different systems , there different nature...

STATIC LOADING DESIGN: FOS AND ITS APPLICATIONS

0
DESIGN STRESSES AND CONCEPT OF FACTOR OF SAFETY (FOS) DESIGN and Designing are to be safely done of a machine element, so it is necessary...

STATIC LOADING DESIGN 1: INTRO. TO LOADING

0
LOADS: DEFINITION & TYPES DEFINITION OF LOADING Mechanical resistance against which system acts or reacts.CLASSIFICATION OF LOADS :1. WRT TIME2. WRT DIRECTION3. WRT DISTRIBUTIONELASTIC CONSTANTSIts...

THEORIES OF FAILURE 3 – STRAIN ENERGY

0
NEED OF ENERGY STUDY IN TOF Study through concept of stress and strain made the Analysis of Theories of failure problematic and inaccurate. So ,...